An experimental and modeling study of the oxidation of n-heptane,ethylbenzene, and n-butylbenzene in a jet-stirred reactor at pressures up to 10 bar

In the context of better understanding pollutant formation from internal combustion engines, new experimental speciation data were obtained in a high-pressure jet-stirred reactor for the oxidation of three molecules, which are considered in surrogates of diesel fuel, n-heptane, ethylbenzene, and n-butylbenzene. These experiments were performed at pressures up to 10 bar, at temperatures ranging from 500 to 1 100 K, and for a residence time of 2 s. Based on results previously obtained close to the atmospheric pressure for the same molecules, the pressure effect on fuel conversion and product selectivity was discussed. In addition, for the three fuels, the experimental temperature dependence of species mole fractions was compared with simulations using recent literature models with generally a good agreement. For n-heptane, the obtained experimental data, at 10 bar for stoichiometric mixtures, included the temperature dependence of the mole fractions of the reactants and those of 21 products. Interestingly, the formation of species previously identified as C₇ diones was found significantly enhanced at 10 bar compared with lower pressures. The oxidation of ethyl- and n-butylbenzenes was investigated at 10 bar for equivalence ratios of 0.5, 1, and 2. The obtained experimental data included the temperature dependence of the mole fractions of the reactants and those of 13 products for the C₈ fuels and of 19 products for the C₁₀ one. For ethylbenzene under stoichiometric conditions, the pressure dependence (from 1 to 10 bar) of species mole fraction was also recorded and compared with simulations with more deviations obtained than for temperature dependence. For both aromatic reactants, a flow rate analysis was used to discuss the main pressure influence on product selectivities.     

Coexistence of Spin–Lattice Relaxation and Phonon-Bottleneck Processes in GdIII–Phthlocyaninato Triple-Decker Complexes under Highly Diluted Conditions

Gd³⁺ complexes have been shown to undergo unusual slow magnetic relaxation processes similar to those of single-molecule magnets (SMMs), even though Gd³⁺ does not exhibit strong magnetic anisotropy. To reveal the origin of the slow magnetic relaxation of Gd³⁺ complexes, we have investigated the magnetic properties and heat capacities of two Gd³⁺-phthalocyaninato triple-decker complexes, one of which has intramolecular Gd³⁺–Gd³⁺ interactions and the other does not. It was found that the Gd³⁺–Gd³⁺ interactions accelerate the magnetic relaxation processes. In addition, magnetically diluted samples, prepared by doping a small amount of the Gd³⁺ complexes into a large amount of diamagnetic Y³⁺ complexes, underwent dual magnetic relaxation processes. A detailed dynamic magnetic analysis revealed that the coexistence of spin–lattice relaxation and phonon-bottleneck processes is the origin of the dual magnetic relaxation processes.     

Solvophobically Driven Complexation of Adamantyl Mannoside with β-Cyclodextrin in Water and Structured Organic Solvents

The effects of solvent and temperature on the complexation of adamantyl mannoside with β-cyclodextrin and 6-O-monotosyl-6-deoxy-β-cyclodextrin were explored experimentally and by means of molecular dynamics simulations. Efficient binding was observed only in hydrogen-bonded solvents, which indicated solvophobically driven complexation. The stability of the inclusion complex was considerably higher in aqueous media. A pronounced temperature dependence of Δ_rH^○ and Δ_rS^○, resulting in perfect enthalpy–entropy compensation, was observed in water. The complexation thermodynamics was in line with classical rationale for the hydrophobic effect at lower temperatures and the nonclassical explanation at higher temperatures. This finding linked cyclodextrin complexation thermodynamics with insights regarding the effect of temperature on the hydration water structure. The complexation enthalpies and entropies were weakly dependent on temperature in organic media. The signs of Δ_rH^○ and Δ_rS^○ were in accordance with the nonclassical hydrophobic (solvophobic) effect. The structures of the optimized product corresponded to those deduced spectroscopically, and the calculated and experimentally obtained values of Δ_rG^○ were in very good agreement. This investigation clearly demonstrated that solvophobically driven formation of cyclodextrin complexes could be anticipated in structured solvents in general. However, unlike in water, adamantane and the host cavity behaved solely as structure breakers in the organic media explored so far.     

pH-Dependent Slipping and Exfoliation of Layered Covalent Organic Framework

Layered/two-dimensional covalent organic frameworks (2D COF) are crystalline porous materials composed of light elements linked by strong covalent bonds. Interlayer force is one of the main factors directing the formation of a stacked layer structure, which plays a vital role in the stability, crystallinity, and porosity of layered COFs. The as-developed new way to modulate the interlayer force of imine-linked 2D TAPB-PDA-COF (TAPB = 1,3,5-tris(4-aminophenyl)benzene, PDA = terephthaldehyde) by only adjusting the pH of the solution. At alkaline and neutral pH, the pore size of the COF decreases from 34 Å due to the turbostratic effect. Under highly acidic conditions (pH 1), TAPB-PDA-COF shows a faster and stronger turbostratic effect, thus causing the 2D structure to exfoliate. This yields bulk quantities of an exfoliated few/single-layer 2D COF, which was well dispersed and displayed a clear Tyndall effect (TE). Furthermore, nanopipette-based electrochemical testing also confirms the slipping of layers with increase towards acidic pH. A model of pH-dependent layer slipping of TAPB-PDA-COF was proposed. This controllable pH-dependent change in the layer structure may open a new door for potential applications in controlled gas adsorption/desorption and drug loading/releasing.     

Controlling the Length of Cooperative Supramolecular Polymers with Chain Cappers

The design and the characterization of supramolecular additives to control the chain length of benzene-1,3,5-tricarboxamide (BTA) cooperative supramolecular polymers under thermodynamic equilibrium is unraveled. These additives act as chain cappers of supramolecular polymers and feature one face as reactive as the BTA discotic to interact strongly with the polymer end, whereas the other face is nonreactive and therefore impedes further polymerization. Such a design requires fine tuning of the conformational preorganization of the amides and the steric hindrance of the motif. The chain cappers studied are monotopic derivatives of BTA, modified by partial N-methylation of the amides or by positioning of a bulky cyclotriveratrylene cage on one face of the BTA unit. This study not only clarifies the interplay between structural variations and supramolecular interactions, but it also highlights the necessity to combine orthogonal characterization methods, spectroscopy and light scattering, to elucidate the structures and compositions of supramolecular systems.     

meso-Diazacorrphycenes: Neighboring Effect of Two Nitrogen Atoms

The neighboring effect of two adjacent heteroatoms influences the structures and properties of heterocyclic compounds. Herein, we demonstrated that the introduction of two adjacent sp² nitrogen atoms into a porphyrinic skeleton significantly enhanced its Brønsted basicity due to the repulsive interaction between two lone pairs on the nitrogen atoms. Palladium- and copper-templated ring closure of dichlorobis(dipyrrin) with hydrazine hydrate provided meso-diazacorrphycene palladium and copper complexes in good yields. The structural, magnetic, and electrochemical properties of the diazacorrphycene complexes were investigated experimentally and theoretically to elucidate the effect of the meso-nitrogen atoms.     

Magnetic field as a means to identify initiating reaction in oxidation of organic substances with molecular oxygen

1. Download : Download high-res image (77KB)
2. Download : Download full-size image

     

Magnetoelectric effects in multiferroic Y-type hexaferrites Ba(0.3)Sr(1.7)CoxMg(2-x)Fe(12)O(22)

Y-type hexaferrites with tunable conical magnetic structures are promising single-phase multiferroics that exhibit large magnetoelectric effects. We have investigated the influence of Co substitution on the magnetoelectric properties in the Y-type hexaferrites Ba(0.3)Sr(1.7)CoxMg(2-x)Fe(12)O(22)(x = 0.0, 0.4, 1.0, 1.6). The spin-induced electric polarization can be reversed by applying a low magnetic field for all the samples. The magnetoelectric phase diagrams of BaBa(0.3)Sr(1.7)CoxMg(2-x)Fe(12)O(22) are obtained based on the measurements of magnetic field dependence of dielectric constant at selected temperatures. It is found that the substitution of Co ions can preserve the ferroelectric phase up to a higher temperature, and thus is beneficial for achieving single-phase multiferroics at room temperature.     

Understanding the Reshaping of Fluorinated Polyester Vitrimers by Kinetic and DFT Studies of the Transesterification Reaction

Vitrimers are a third class of polymers gathering the mechanical properties and solvent resistance of 3D thermosets and the reprocessability of thermoplastics. This unique behaviour is due to the triggering of certain covalent exchange reactions that allow the network to rearrange upon application of a stimulus. The constitutive feature of vitrimers is the adoption of a glass-like viscosity during the rearrangement of the network, often due to an associative mechanism for the exchange reaction. Transesterification networks are one of the most studied type of vitrimers that usually require the incorporation of a catalyst, implying the associated drawbacks. Following up on a recent report on catalyst-free transesterification vitrimers in which the ester functions are particularly reactive thanks to the presence of fluorine atoms in α- or β-position, parallel DFT calculations and an experimental kinetic study on model molecules are presented in order to quantitatively assess the effect of neighbouring fluorinated groups on the transesterification reaction rate.